HDMI Matrix Switch over CAT 6 with PoC Simplifies Installations.

Norcross, Ga. - Octava Inc., specialists in HDMI solutions, announced the release of 2 new PoC enabled HDMI over Twisted Pair Matrix: HD44CATMX and HD48CATMX.

Responding to requests from our Installer and Integrator customers to further improve our already popular 4x8 and 4x4 HDMI Matrix over CAT cable we have added PoC, power over cable, to directly power the matching Octava In-room Receiver (Rx). PoC enables direct powering of the Octava In –room Zone Receivers over twisted pair cable( CAT 5 or CAT 6) . This significantly simplifies installation behind your slim line TV, Projector or AVR by eliminating the need for an external power supply for the In-room Zone Receiver (RX).

Features:

• 4x8 and 4x4 full non-Blocking HDMI Matrix (Any Source to Any Display).

• Mirrored HDMI + dual RJ-45 Output sockets – enables connection to up to ten (4x8) or  eight (4x4) Sink devises (AVR, Display or Projector).

• PoC provides Power to the attached Rx units over CAT5 or CAT6 cables.

• IR, Push   Button, Wired IR and RS232 control.

• Rear mounted Wired IR socket – (Optional IR extender Receiver cable available).

• Five Pre-configured User selectable EDID modes.

• One Programmable EDID mode – via USB port.

• 3D compatible plus 'Forced 3D’ EDID mode. • Supports 1080p (60/50/24)

• Redesigned Fascia with Mirrored selector buttons for enhanced aesthetics

• Free PC control App.

More info at: www.octavainc.com